Plumbing service call checklist: shut off, fix, test for leaks and clean up

22 itemsChecked November 20, 2026Use every time
The short answer

Find and test the main shut-off, protect the floor, shut water off at the fixture, do the work, turn water on slowly and check every joint, and clean up. Tell the customer if the work needs a permit. Send this list back to the owner.

Arrive4

The work6

Water heaters4

Test4

Finish4

From checklisted.page/checklist/plumbing-service-call-checklist

Send this list to someone

  1. Tap Edit to change any item so it fits you.
  2. Tap Send and share the link by text, WhatsApp or email.
  3. They tick each item on their phone, then tap Done, send it back.
  4. You open their link and see what was done, by whom and when.

No app or account. The list lives inside the link. How it works.

Common questions

Why find the main water shut-off first?

If a pipe or valve breaks during the work, you need to stop the water fast. Showing the customer where it is helps them in an emergency too.

Does plumbing work need a permit?

Many towns require permits for water heaters, new lines and bigger repairs. Check with your town's building department.

How do you check a new plumbing joint for leaks?

Turn water on slowly, wipe the joint dry, then hold a dry paper towel under it. Check again before you leave, since slow drips take time.

Learn more

Plain-English guides from our sister sites:

This list helps you remember things. It is not legal, medical, tax or financial advice. Rules differ by state, so check with the office or professional in charge. Disclaimer.