New water heater: picking, installing and keeping it safe
Pick the type and size for your household, have a licensed pro install it with a permit if your town needs one, make sure the relief valve and pipe are in place, check gas venting, and set it to 120°F, which CPSC says cuts the risk of scalds.
Is it time?4
Pick one5
Install7
Safety and care6
From checklisted.page/checklist/new-water-heater
Common questions
What temperature should a water heater be set to?
CPSC says setting it to 120°F helps prevent most tap water scald injuries, and it also saves energy. Check your manual for which mark on the dial means 120°F.
Do I need a permit to replace a water heater?
Many towns require one, especially for gas models. Ask your local building department. A licensed plumber will usually know and pull it.
How long does a water heater last?
It depends on the type, water quality and care. Watch for rust, leaks at the base and less hot water, and check the maker's warranty for a guide.
Learn more
Plain-English guides from our sister sites:
- A pipe burst or the basement flooded explained.page
- Home energy tax credits explained.page
This list helps you remember things. It is not legal, medical, tax or financial advice. Rules differ by state, so check with the office or professional in charge. Disclaimer.